CATAGÓIRÍ
TÁIRGÍ RÁTHAÍOCHTA
Coil Alúmanam Brataithe Pvdf
Réamhrá Coil Alúmanam Brataithe Pvdf
Is cineál amháin de choil alúmanaim brataithe Dath é Pvdf Coil Alúmanam Brataithe, Is féidir coil alúmanaim brataithe dath a roinnt ina poileistear (Corpoideachas) corna alúmanaim brataithe, fluaracarbón (PVDF) corna alúmanaim brataithe agus corna alúmanaim brataithe sorcóir eapocsa.
Coil Alúmanam Brataithe Pvdf
Is cineál nua ábhar é coil alúmanaim brataithe Pvdf a bhfuil an-tóir air faoi láthair. Tá cosaint mhaith comhshaoil ag coil alúmanaim brataithe Pvdf. Anois tá ré a thugann aird níos mó agus níos mó ar chosaint an chomhshaoil. Tá cornaí alúmanaim brataithe Pvdf resistant to saline, creimeadh báisteach aigéadach agus alcaile. Ní dhéanfaidh siad tocsainí a chreimeadh ná a tháirgeadh, aon gháis tocsaineacha a scaoileadh, nó ina chúis le damáiste keel. Agus tá na feistis meirgeach agus lasair-retardant.
Paraiméadair Coil Alúmanam Brataithe Pvdf
Ábhar: AL1050、AL1060、AL1100、AL3003、AL3004、AL3105、AL5005、AL5052
Cumhdach: sciath fluaracarbóin, sciath poileistear, gráin adhmaid, priontáil, vearnais
Tiús: 0.25mm-4.00mm
Tiús sciath: PVDF ≥ 25micron, POILEISTEAR ≥ 18micron
Dath: CBCC, Cártaí dath RAL agus Pantone nó meaitseáil dath de réir samplaí custaiméirí.
Caighdeán forfheidhmithe: YS/T431-2009
Feidhmchláir tipiciúla: Úsáidtear go forleathan i maisiú taobh istigh, uasteorainneacha, painéil balla, díonta, troscán, ballaí seachtracha éagsúla agus taobh istigh.
Gnéithe: Tá friotaíocht aimsire den scoth ag an táirge seo agus vearnais thriomú ardteochta. Tá na buntáistí a bhaineann le coinneáil snasta ard, cobhsaíocht dath maith, agus athruithe beaga ar dhifríocht datha. Tá tréimhse bharántas sciath PE thart 15 blianta, agus tá tréimhse bharántas PVDF thart 30 blianta.
Cur i láthair ar PVDF (fluaracarbón) sciath
PVDF (fluaracarbón) Tá an sciath déanta as roisín fluaracarbóin, lí, agus tuaslagóir eistear mar amhshubstaintí. The coating is baked and baked at high temperature and solidifies right into a dry film, which has awesome climate resistance. PVDF coating may be divided into conventional PVDF coating and nano PVDF coating.
White Pvdf Coated Aluminum Coil
A. The traditional PVDF coating makes use of KYNAR500 PVDF. After to 3 coatings and baking, it has top acid and alkali resistance. It’s miles long lasting in harsh weather and environments and will now not fade for 15 blianta. In view of those statistics, we suggest the utility of this panel for exterior wall cladding.
B. Nano PVDF coating, which isn’t the same as conventional PVDF, is a transparent coating. It incorporates nano elements that protect the panel from pollutants, and since nano has a self-cleansing impact, it may easily cast off dirt and pollution from rain or water.
PVDF (fluaracarbón) coating specifications
| Base material: | 1000 sraith, 3000 sraith, 5000 sraith, 6000 sraith, 8000 sraith, cóimhiotal alúmanaim |
| Tiús: | 0.08-1.5 mm |
| Leithead: | ＜1800mm |
| Coil core diameter: | 150mm, 405mm, 505mm, 508mm, 510mm |
| Tiús sciath: | PVDF ≥25mm, PE≥18mm |
| Color standard: | E < 2 or not obvious by visual inspection |
| Brinell cruas: | > 2HB |
| Coating glue: | Not less than first-level impact: no cracks (50kg/cm, ASTMD-2794:1993) |
| Bending strength: | >100次 |
| Boiling point: | no any distortion and color change (in the 99 more or less 1 degreewater, then cooling 2 uair an chloig) |
| Corrosivity: | surface deep in the 5% muriatic acid and 5% NaCL, interior deepin the 2% muriaticacid and 2% NaCL, after 48 uair an chloig, no change |
Multi-layer painting process
The multi-layer spraying process includes three sprays (three sprays for short), primer, topcoat, cover varnish and two sprays (primer and topcoat).
According to the thickness of the coating, it can be divided into single coating (4-20 miocrón); double coating (25-28 miocrón); three coatings (35-38 miocrón).
Pvdf Coated Aluminum Coil Structure
Pvdf Coated Aluminum Coil Features:
- 1. Smoothness: Gan eangú ilchodach teocht ard ar an dromchla. Níl aon strus iarmharach ar dhromchla an bhoird agus gan aon dífhoirmiúchán tar éis lomadh.
- 2. Maisiú: Péinteáilte le gráin adhmaid agus gráin cloiche, tá uigeacht fhisiceach réalaíoch aige agus áilleacht nádúrtha beoga. Is féidir na patrúin a dhéanamh go randamach, raon leathan roghanna pearsanta a thabhairt do chustaiméirí, saibhriú brí daonnúil an táirge, agus taitneamh níos áille a thabhairt do dhaoine.
- 3. Friotaíocht aimsire: Tá coinneáil ard-snasta ag an bpatrún péint atá déanta ag sciath leanúnach agus bácáil ardteochta, cobhsaíocht dath maith, agus athruithe íosta datha. Tá barántas 10 mbliana ag péint poileistir, agus tá barántas 20 bliain nó níos mó ag péint fluaracarbóin.
- 4. Meicniúil: Bain úsáid as ábhair alúmanaim ardchaighdeáin, plaistigh agus greamacháin, agus teicneolaíocht ilchodach chun cinn a ghlacadh. The product has the bending and flexural strength required for decorative panels. Under four-season climate conditions, changes in wind pressure, teocht, humidity and other factors will not cause bending, deformation, expansion, srl.
- 5. Environmental protection: Resistant to salt, creimeadh báisteach aigéadach agus alcaile, will not corrode or produce poisonous bacteria, does not release any toxic gases, will not cause corrosion of keels and fixings, and is flame retardant. According to national regulations, it shall not be lower than B1 level.
Pvdf Coated Aluminum Coil Production
UV Resistance: PVDF coatings have excellent resistance to UV radiation, making them ideal for outdoor applications exposed to sunlight.
LOW MAINTENANCE: Pvdf coated aluminum coil is easy to maintain, has a smooth surface and is resistant to dirt, grime and stains. They don’t require frequent cleaning or repainting, making them a low-maintenance option.
Excellent Adhesion: PVDF coatings have excellent adhesion to metal surfaces, ensuring they stay in place even in harsh conditions.
Wide Color Range: Pvdf covered Aluminum Coil is available in a variety of colors, including metallic and non-metallic options, allowing customization to suit the desired aesthetic.
Good Dimensional Stability: PVDF coatings have good dimensional stability, which means they do not expand or contract significantly with changes in temperature or humidity. This helps ensure that the coated metal maintains its shape and size over time.
Inbhuanaitheacht: PVDF coatings are a sustainable choice because they are made from fluoropolymers that can be recycled and reused.
Application of Pvdf coated aluminum coil
Polyvinylidene fluoride (PVDF) is a high-performance fluoropolymer commonly used as a coating material. Pvdf coated aluminum coil is known for its excellent durability, chemical resistance and UV resistance, making it suitable for a wide range of applications. Some common applications of Pvdf coated aluminum coil include:
Construction Applications: PVDF coated aluminum coils are commonly used to coat the exteriors of buildings and other structures such as cladding, roofs and window frames. These coatings protect against weathering, fading, and other forms of damage.
Industrial Applications: PVDF coated aluminum coils are used to protect metal parts from corrosion, abrasion and other forms of wear and tear. They are commonly used in the aerospace, automotive and chemical processing industries.
Consumer Products: PVDF coated aluminum coils are used to protect a variety of consumer products such as appliances, furniture and sporting goods. The coating protects against scratches, chips and other forms of damage.
Infrastructure: PVDF coated aluminum coils are used to protect various infrastructures such as bridges, highways and pipelines. These coatings protect against corrosion, UV radiation and other forms of damage.
Other Applications: PVDF coated aluminum coils are also used in various other applications such as medical equipment, electrical insulation, and food processing equipment.
Pacáiste
Inner core: paper core or steel core
Outer layer: moisture-proof plastic + cardboard
Pallet: wooden pallet
Pvdf Coated Aluminum Coil Package
